(Syntho-Glass® is manufactured by a company in Florida, USA. The following testimonials are from their customers around America. If you have any comments or stories you wish to share about this or any other products we stock, we would be very keen to hear from you!)

"Oceaneering has utilised the product known as Syntho-Glass® for a number of years in the Gulf of Mexico. We have had excellent results with this product for the permanent repair of pipelines and risers."
Oceaneering International, Inc., Bayou Vista, Louisiana

"Amoco Oil Co. is to clean and wrap nine breasting dolphins which consist of approximately seventy-two eighteen inch diameter vertical steel pilings. The research center has given approval for the application of Syntho-Glass® in wetted zone of the docking facility. This will save Amoco over one million dollars in replacement costs."
Tejas Services, Dickinson, Texas

"We have used the Syntho-Glass® on many acid leaks and the product has not failed nor had any breakdown in physical structure. We have proven that Syntho-Steel is the best product to permanently seal any steam line leaks."
USS Posco, Pittsburg, California

"Our application of Syntho-Glass® involved patching a hole in a cylinder under water. Following 10 minutes of pressure at 160 lbs psi there was no noticeable air escape from the patched 2x2 inch hole. Eight hours later there was no change. Syntho-Glass® is an extraordinarily efficient patch and works well under water. One hour and fifteen minutes of applied heat of varying degrees saw no change in Syntho-Glass® characteristics nor was adhesion affected."
Report to Consumers, Eugene, Oregon

"The Syntho-Glass® material saved the project. The product you are distributing has been written into the company's specifications to protect the vertical steel pipe piling in the corrosive splash-zone area. It is an amazing product."
Pile Driving Specialists, Inc., Houston, Texas

"I had several small leaks in our main water supply pipe which supplies an average of 2.5 million gallons of water each day. The pipe was leaking in 4 places. The pipe that needed to be fixed was a 16" diameter steel pipe covered with many coats of paint. Four holes were shooting water 30 feet into the air. The repair was finished in an amazing 40 minutes! We were able to power up to full capacity within the hour. Your repair not only saved me money, but also saved Wellington residents from an emergency crisis over the weekend."
ACME Improvement District, Wellington, Florida

"Syntho-Glass® is a lifesaver. Stops the leaks and is quick and easy to use. No draining heat lines, no cutting and soldering copper pipe - it is incredible!"
John R. Bylsma, Sr.

"Our customers (diving companies) have been demanding more and more of the product lately because their customers (oil companies) are requesting it by name. Comments are that it is easier to apply than Splash Zone and it quickly repairs scrapes and gouges in the pipelines caused by anchors, trawls, or just their own testing. It is truly nice to represent a product so much in demand."
Diver's Supply, Gretna, Louisiana

"While working on the sewage line going from the Statue of Liberty to shore we discovered a 3" by 8" hole in the pipe. The pipe being 100 years old and buried in the mud... no commercial made pipe repair clamp is made to repair the damage. We decided to use your product and wrapped the pipe. Within 1/2 hour they were back on line and it held fine."
Randive Inc., Staten Island, NY

"For the past two years we have successfully used almost all of your products to seal and stop leaking pipes throughout their entire facility. Neptune's products have often saved the day. With the aid of your products, we have been able to short and stop 100% of the leaks in the pipelines and fittings, without exception. The piping is PVC and ranged in size from 2 to 8 inches in diameter, operating at 80 to 90 PSI, transporting water, dilute acids and an assortment of chemicals."
Corrosion Controllers, Washougal, Washington

"CGC Point Winslow was diverted to assist an 80 foot fishing vessel Brandi II taking on water and the crew preparing to abandon ship, over 100NM offshore. The rubber of the shaft packing had melted around the shaft, causing water to spray throughout the boat. The long term repair would have the F/V hauled out of the water once safely towed to port. The short term solution was to use Syntho-Glass® instant repair resin coated cloth to patch the shaft packing. The R&A was passed three kits from the cutter's Pipe Patching Kit. Syntho-Glass® is required on all cutters. The Syntho-Glass® was a huge success holding for the entire tow to port, saving the vessel from sinking and placing the crew in harm's way."
United States Coast Guard, Morgan City, Louisiana

(Click here for the original brochure containing these testimonials).