FastSteel

 

"Don't weld it, FASTSTEEL it!"

FASTSTEEL® is a hand-mixable, steel-reinforced, epoxy putty adhesive sealant that mixes in just one minute to provide fast repairs to items made of ferrous and aluminium metals. it comes in a handy four-ounce roll form with the curing agent encapsulated in the consistency eliminates drips and runs, providing "no mess" applications with no tools required for use.

Usage instructions

Before applying, roughen and clean the area to be repaired. Then follow these easy steps:

1. Cut or twist off required amount.
2. Mix by kneading with fingers to a uniform colour. If mixing is difficult, warm FastSteel epoxy to room temperature or slightly above.
3. Apply to surface to be repaired (within two minutes of mixing). Force into any cracks or holes and strike off excess material, preferable with a tool wet with clean water.

When applying to a damp, wet or slowly leaking area, work the material forcefully into the surface and apply pressure until adhesion begins to take effect.

For Best Results: Use damp fingers for easier mixing and application. Remove excess material before hardening begins.

Curing: FastSteel epoxy has a work life of approximately 3 minutes. After 5-10 minutes, it will harden and form a tenacious bond. After 60 minutes the system can be put back into service.

Examples of usage

• Repair ferrous metals
• Rebuild engine parts, fill cracks and seal leaks
• Form nuts & bolts, repair stripped threads
• Repair metal tools, equipment, pipes, appliances and auto bodies
• Will not rust or shrink

Further info

Product brochure [PDF]