InstaCrete

"Concrete in a Tube"

Ideal for Anchoring, Patching and Sealing Concrete, Mortar and Masonry

InstaCrete® is an amazing polymer compound for instant concrete repair. Easy-to-use InstaCrete® shapes like modelling clay, then sets "rock hard" in 60 minutes. InstaCrete® cures to a cement-like colour and texture "to look and feel like real concrete".

Usage instructions

Before applying, roughen and clean the area to be repaired. Then follow these easy steps:

1. Cut or twist off required amount.
2. Mix by kneading with fingers to a uniform colour. If mixing is difficult, warm InstaCrete epoxy to room temperature or slightly above.
3. Apply to surface to be repaired (within two minutes of mixing). Force into any cracks or holes and strike off excess material, preferable with a tool wet with clean water.

When applying to a damp, wet or slowly leaking area, work the material forcefully into the surface and apply pressure until adhesion begins to take effect.

For Best Results: Use damp fingers for easier mixing and application. Remove excess material before hardening begins.

Curing: InstaCrete epoxy has a work life of approximately 4 minutes. After 5-10 minutes, it will harden and form a tenacious bond. Final cure occurs within 60 minutes.

Examples of usage

• Repair of chipped concrete floors, curbing and steps
• Repair and rebuild decorative concrete trim moldings, statues, birdbaths, and other concrete lawn ornaments
• Ideal for anchoring
• Seal tie-rod holes
• Cures to a concrete colour and texture

Further info

Product brochure [PDF]