QuikCopper

 

"The Plumber in a Tube"

QUIKCOPPER® is a hand-mixable, copper reinforced, epoxy putty that mixes in just one minute to provide fast repairs to pipes, tanks, and vessels made of copper, brass, bronze, and other non-ferrous metals. It comes in a handy four-ounce roll form with the curing agent encapsulated in the contrasting colour base material.

Usage Instructions

Before applying, roughen and clean the area to be repaired. Then follow these easy steps:

1. Cut or twist off required amount.
2. Mix by kneading with fingers to a uniform colour. If mixing is difficult, warm QuikCopper epoxy to room temperature or slightly above.
3. Apply to surface to be repaired (within two minutes of mixing). Force into any cracks or holes and strike off excess material, preferable with a tool wet with clean water.

When applying to a damp, wet or slowly leaking area, work the material forcefully into the surface and apply pressure until adhesion begins to take effect.

For Best Results: Use damp fingers for easier mixing and application. Remove excess material before hardening begins.

Curing: QuikCopper epoxy has a work life of approximately 3 minutes. After 5-10 minutes, it will harden and form a tenacious bond. Final cure occurs in 60 minutes.

Examples of usage

• Repairs copper, brass, bronze and other ferrous metals
• Repair plumbing leaks in 15 minutes
• Bonds to damp and slow leaking surfaces
• Seals leaks in pipes, elbows, joints, sleeves, traps and drains
• Great for freeze breaks

Further info

Product brochure [PDF]