QuikPlastik

"The Flexible Solution for Plastic Repair"

QUIKPLASTIK® is a hand-mixable, fast setting epoxy putty that bonds to all major plastic types except polyolefins. When mixed, QUIKPLASTIK® is the consistency of modelling clay and can be molded into shapes, wrapped around or used to build up and repair just about anything made from many rigid or semi-flexible plastics. After mixing, the colour of the putty fades to white.

Usage instructions

Before applying, roughen and clean the area to be repaired. Then follow these easy steps:

1. Cut or twist off required amount.
2. Mix by kneading with fingers to a uniform colour. If mixing is difficult, warm QuikPlastik epoxy to room temperature or slightly above.
3. Apply to surface to be repaired (within two minutes of mixing). Force into any cracks or holes and strike off excess material, preferable with a tool wet with clean water.

When applying to a damp, wet or slowly leaking area, work the material forcefully into the surface and apply pressure until adhesion begins to take effect.

For Best Results: Use damp fingers for easier mixing and application. Remove excess material before hardening begins.

Curing: QuikPlastik epoxy has a work life of approximately 20 minutes. After 35-40 minutes, it will harden and form a tenacious bond. After 2-3 hours, the system can be put pack in use.

Examples of usage

• Automotive - Plastic trim
• Appliances - Repair and rebuild broken parts
• Plumbing - Seal leaks and bonds to major types of plastic

Approved for plumbing pipe and plastic outdoor furniture.

Further info

Product brochure [PDF]